Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Irvine?
New garage door installation in Irvine typically runs $700 to $2,200 for the door itself, and $950 to $2,750 once you add a new opener and professional installation. A standard single-car steel door in a tract home off Culver Drive lands near the low end, while a two-car custom wood or full-view aluminum door in a hillside property near Turtle Rock pushes toward the top. Most Irvine homeowners we work with spend somewhere around $1,400 to $1,900 for a complete door-plus-opener replacement on a two-car garage.
Key Takeaways
- Door-only installation: $700 – $2,200 depending on size, material, and style.
- Opener installation adds $250 – $550; most Irvine homeowners bundle it with the door.
- Standard single-car steel doors sit at the low end; insulated two-car and custom doors sit at the high end.
- Irvine’s coastal humidity and inland heat both stress doors and openers, so material choice matters here more than in drier inland markets.
- We service eight major brands (LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, Raynor) and can match a new door to the opener you already own.
Garage Door Installation Cost Breakdown (2026)
Here’s what Irvine homeowners actually pay for the pieces of a new garage door project. These are the same ranges we quote every day when we’re working in the field across Irvine.
| Line item | Typical Irvine cost |
|---|---|
| New door installation (standard single, steel) | $700 – $1,100 |
| New door installation (insulated double, steel) | $1,200 – $1,800 |
| New door installation (custom wood, full-view aluminum) | $1,800 – $2,200 |
| Opener installation (chain or belt drive) | $250 – $550 |
| Smart opener installation (Wi-Fi, app control) | $350 – $550 |
| Spring replacement (when done with installation) | $180 – $340 |
| Cable replacement (when done with installation) | $130 – $250 |
| Panel replacement (individual section, not full door) | $250 – $500 |
| Track realignment (during install) | $120 – $240 |
| Roller replacement (quiet rollers upgrade) | $110 – $220 |
| Full garage door repair (existing door, prior to install decision) | $150 – $600 |
What pushes a project toward the top of the range: a two-car wide door, insulated panels, custom window inserts, wood or full-view aluminum, a smart opener, and any repair work needed to bring the existing framing or tracks up to spec. What keeps it at the low end: a standard single-car steel door, a basic chain-drive opener, and a clean existing installation with no surprises behind the trim. If you’re only replacing individual panels and not the full door, that’s usually a separate conversation starting at $250 for a single section. Our team handles the whole job under one name so the door hardware and the opener are covered by the same crew, not farmed out to two contractors.
What Affects Garage Door Installation Pricing in Irvine
Irvine isn’t a single market. A door install off Jamboree Road in the Irvine Business Complex sits in a very different environment from one in the hills above Turtle Rock or a 1990s tract home in Northwood. Here’s what actually moves the number on a quote.
- Door size. A single-car door (typically 8 – 9 feet wide) uses roughly half the material of a double-car door (16 feet), so the price gap lands between 30% and 50% of the total. Most Irvine garages are two-car; some newer condo garages are single.
- Material and insulation. A steel pan door runs at the bottom of the range. Insulated steel with a polyurethane core jumps into the middle. Wood and full-view aluminum land at the top and require more careful installation to keep the door balanced on Irvine’s often-narrow residential lots. Irvine’s summer heat inside a west-facing garage is real, and an insulated door makes the space usable year-round rather than a sauna from June through September.
- Opener type and condition. A new belt-drive opener installs faster than a jackshaft or wall-mounted opener in a low-clearance garage. If your existing opener is an older LiftMaster or Chamberlain unit and the motor is still sound, we can often keep it and only replace the door. If it’s a Genie or Craftsman from the 2000s with no safety sensors, replacement usually makes more sense. We stock and service all of those brands plus Wayne Dalton, Clopay, Amarr, and Raynor.
- Existing door condition. A door that’s off its tracks, has bent panels, or has a snapped torsion spring isn’t always worth installing over. Spring repair ($180 – $340) and cable repair ($130 – $250) are cheaper than a full replacement if the door body itself is still sound. We’ll tell you honestly which makes sense for your specific door.
- Permits and HOA rules. Irvine has specific requirements for garage door replacement and some HOAs (especially in planned communities like Woodbridge, Woodbury, and Great Park) require architectural approval before a door color or style change. That approval doesn’t cost a permit fee in most cases, but it does add time and a step. We can talk through what your HOA typically asks for before you commit to a style.
- Access and framing. A tight side yard, low clearance in the garage ceiling, or a door opening that’s slightly out of square (common on older Ranch and El Camino Real-area homes) can add work to refit the frame. That’s usually $100 – $300 in additional labor, not thousands.
Should You Repair or Replace Your Garage Door in Irvine?
Here’s the honest math. If your door is structurally sound and only one component failed, repair usually wins. A snapped spring costs $180 – $340 to fix. A door that’s off its tracks costs $120 – $240 to realign. A failing opener costs $120 – $320 to repair or $250 – $550 to replace with a new unit. Those are all well below a $700 – $2,200 install.
Replacement starts to make sense when the door body itself is degraded. A wood door with rot at the bottom rail, a steel door with rust through multiple panels, a door that’s been hit by a car and can’t be realigned cleanly, or a door old enough that replacement hardware is hard to source. Insulated-door upgrades are also worth considering if you’re using the garage as a workspace or a home gym, which is common in Irvine homes with two-car garages and no basement. We’ll look at the door, the opener, the tracks, and the springs together and tell you straight whether a repair will hold for years or whether you’re better off replacing now. Same crew handles both paths; there’s no incentive for us to push replacement over repair.
One more thing Irvine homeowners ask about: door color. A lot of Spanish-style homes around Old Towne Orange and the older Irvine Ranch neighborhoods look best with a wood-tone door, while modern Great Park homes lean toward full-view aluminum or a dark steel panel. We can source Clopay, Amarr, Wayne Dalton, and Raynor profiles in those looks without special-ordering a brand the crew has never installed.
How to Save on Garage Door Installation in Irvine
There’s no magic discount code, but there are real ways to keep the number down without cutting corners. These are the ones we actually see work for Irvine homeowners.
- Bundle door and opener. Installing both at once typically costs less in labor than doing them separately a year apart. A new door on an old opener is a mismatch waiting to happen.
- Stick with the brand family you already have. If your existing opener is a LiftMaster or Chamberlain that’s still functioning, we can match a new door to it and skip the opener line item entirely. You save the $250 – $550.
- Choose a stock size. Standard single (8 – 9 ft) and double (16 ft) doors come at lower cost than custom widths. Measure your opening before you shop; if it’s standard, you have more room to stay in the low end of the range.
- Ask about off-season timing. Installation demand is heavier in spring and early summer. Late fall and winter installations sometimes come with more scheduling flexibility, which can help on labor.
- Repair single components when they’re the only problem. A $110 – $220 roller upgrade or a $120 – $240 track realignment can extend the life of a door that’s otherwise fine. Don’t replace a door for a failed roller.
- Get a real estimate, not a phone guess. Irvine garage door prices vary by door size, material, and existing framing. A free in-person estimate gives you a firm number instead of a “starting at” range. We offer free estimates across Irvine; call (855) 492-3366 and we’ll set one up.
If you’re not sure whether you need repair or a full install, our Garage Door Installation in Irvine page walks through what the install process actually looks like, and our home page covers all three of our service lines. For the broader repair picture, our guide to garage door repair in Irvine covers the ranges for springs, cables, and panels. If you’re in a nearby city, we also serve garage door installation in Tustin, Costa Mesa, Newport Beach, Huntington Beach, Lake Forest, Mission Viejo, Santa Ana, and Orange. Opener-specific questions are covered on our garage door opener repair in Irvine page, and if you’re weighing a new door against repairing the existing one, our panel replacement guide has more detail.
FAQs – Garage Door Installation Cost
How much does garage door installation cost in Irvine in 2026?
Most Irvine garage door installations cost between $700 and $2,200 for the door alone, or $950 to $2,750 when you add a new opener. A standard single-car steel door in a typical Irvine tract home typically lands in the $700 – $1,100 range. Call (855) 492-3366 for an exact quote based on your door size and material; estimates are free.
Is it cheaper to repair or replace a garage door in Irvine?
Repair is cheaper in most cases: spring repair runs $180 – $340, cable repair $130 – $250, and track realignment $120 – $240, versus $700 – $2,200 for a full replacement. Replacement makes sense when the door body itself is degraded (rot, rust through multiple panels, impact damage that can’t be realigned) rather than just one component. Call (855) 492-3366 and we’ll tell you honestly which path fits your door.
How much does a new garage door opener cost installed in Irvine?
Opener installation in Irvine runs $250 – $550 for a standard chain or belt-drive unit, or $350 – $550 for a smart opener with Wi-Fi and app control. A basic opener paired with a new door typically adds less than a standalone install since the labor overlaps. Call (855) 492-3366 for a free estimate on your specific opener.
Does Irvine require a permit to install a new garage door?
Irvine generally doesn’t require a separate building permit for like-for-like garage door replacement, but some HOAs in planned communities (Woodbridge, Woodbury, Great Park) require architectural review before a color or style change. The HOA step adds time rather than a permit fee in most cases. We can walk you through what your specific HOA typically asks for before you commit to a style. Call (855) 492-3366 with questions.
Can you install a new garage door and opener on the same day in Irvine?
Yes, in most cases – a standard door and opener install on a typical Irvine two-car garage is a one-day job when the existing framing is in good shape. Projects that involve custom doors, wood, full-view aluminum, or reframing an out-of-square opening can run into a second day. We’ll give you a realistic timeline with your free estimate. Call (855) 492-3366 to schedule.
What brands can Redstone install in Irvine?
We install and service eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means we’re not locked into one manufacturer’s door or opener, so we can match the right system to your garage and budget instead of steering you toward whatever we happen to stock. If your existing opener is one of those brands and it’s still going strong, we can often install a new door around it. Call (855) 492-3366 to talk through options.
Why Irvine Homeowners Choose Redstone for Garage Door Installation
We work on the brand you already own. That’s the short version. Redstone is a multi-brand specialist with full-spectrum service: garage door repair, garage door opener repair, and complete new-door installation, all under one name and one crew. No referrals, no subcontracting out the opener to someone else while we do the door. If your door is a Clopay and your opener is a Genie, we know both. If you’ve got a 20-year-old Raynor door and a Chamberlain opener from around the same era, we know those too.
That brand familiarity matters at install time. It means we’re not guessing at specs, ordering parts blind, or scheduling a return visit because something didn’t fit. It also means if you’re only replacing the door and keeping the opener, we can tell you upfront whether the old unit will handle the new door’s weight and balance. That’s the kind of thing that separates a one-visit install from a three-visit headache. For homeowners in Irvine who’ve dealt with a contractor who only handles one brand, we’re the single call that covers the whole system.
Get a Free Installation Estimate in Irvine
If you’re ready for a real number instead of a “starting at” range, give us a call. We’ll measure the opening, look at your existing opener, talk through material and style options from the brands we carry, and give you a firm estimate on the spot. Whether you’re in a Great Park townhome with a single-car garage, a Woodbridge two-car, or a hillside home near Turtle Rock, we’ll tell you what your install will actually cost and what’s involved. Call (855) 492-3366 for a free estimate on garage door installation in Irvine.
Pricing reflects the Irvine market as of 2026. Redstone Garage Door Repair offers free estimates – call (855) 492-3366.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
— Luis Salazar"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Hector Martinez"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
— Andre Ingram